2015年第1期目录

访问:927时间:2020-04-23

基于燕尾突变的车辆脱轨机理研究································································ 刘文辉,戴焕云(1)

风沙跃移运动的数值模拟·········································· 刘 博,黄新成,王旭峰,蒋建云,何欢欢(4)

基于ADAMS的铁道车辆脱轨后动态行为研究······································· 曾一鸣,曾 京,可心萌(7)

双面不锈钢复合板热力耦合分析··································································· 李 晋,马立峰(9)

无隔振装置内燃机支承系统固有特性影响因素研究·········· 曾 锐,王 东,闫 兵,华春蓉,董大伟(11)

行星轮系侧隙分析理论探讨················································· 王 文,曹罚君,张跃春,陈 磊(14)

液力自动变速器车辆坡道行驶换档策略研究····························· 傅亮奇,熊 锐,张 宁,钟凯弦(16)

内部EGR对柴油机HCCI高负荷拓展因素的影响·············································· 王英豪,李人宪(19)

非圆齿轮的快速设计系统研究························································· 张新伍,仲梁维,沈景凤(21)

航空器蒙皮维修圆补片小挠度弯曲力学分析········································· 董艇舰,陈 瑾,丁华鹏(24)

高速列车牵引电机直接转矩控制仿真与分析········································· 徐子峻,邬平波,崔利通(27)

基于MAZAK柔性制造线的粒子群与免疫算法研究································ 张 利,孟祥凯,刘文生(29)

扳手体多工序车削机床的虚拟设计······························································· 金 燕,王海平(32)

基于知识工程的余热锅炉智能设计系统研究········································· 夏仁康,仲梁维,洪 亮(34)

基于CFD模拟对比两款恒温箱性能优劣············································· 李 强,王 晗,刘 强(37)

吊管机吊臂结构有限元优化及研究········································· 高文杰,张具安,曹德本,邢树冬(39)

基于SolidWorks的锅炉壳体产品族敏捷设计研究·············································· 汪仁杰,仲梁维(42)

载重汽车平衡悬架橡胶轴承非线性有限元分析······································ 王 军,刘世忠,卢效珍(44)

基于数学形态学的图像边缘提取方法················································· 王 芳,钱 炜,李文超(46)

基于ANSYS的加工中心立柱结构设计及性能分析············································ 王 林,仲梁维(49)

基于柴油机各缸EGR率差异的分缸仿真分析······································· 龙海生,彭宇明,李大勇(52)

垃圾转运设备翻转机构动力优化·································································· 蒋 铮,秦永法(54)

直线共轭内啮合齿轮副啮合强度分析················································· 徐金波,崔建昆,胡翰林(56)

某轻型火炮高平机模态分析······································································· 王东旭,刘树华(59)

基于MATLAB的汽车被动安全评价模型研究················· 奚碧清,周 斌,王燕梅,苏 强,骆 葳(61)

基于ABAQUS的碟式分离机立轴结构模态分析················································ 王 枫,崔建昆(63)

医用剪叉式升降床升降机构分析与优化························ 邓新平,沈景凤,瞿亚浩,曹园园,郑乐辉(65)

双枪高压无气喷涂机的泵体结构设计···························································· 马如宏,俞俊海(68)

基于有限元的深孔加工钻杆刚度分析···························································· 任达陆,王 利(70)

土压平衡盾构机刀盘牛腿的有限元分析························ 任 龙,吴恩启,闵 锐,吴绍民,付彦琨(72)

16V240ZA型柴油机多次喷射数值模拟·························································· 骆 葳,周 斌(75)

两自由度并联机械手的参数化设计与研究································ 洪帅华,白国振,全 松,刘 淼(77)

变速器取力器壳体开裂分析及优化设计····································································· 杨 罡(80)

基于ABAQUS/Explicit的铣削加工物理仿真技术研究········································· 王景平,何明静(81)

基于小波分析对信号噪声的处理及应用························································· 刘时华,张 亚(84)

基于ANSYS的汽车仪表板侧盖板的结构优化设计············································ 麦云飞,刘 威(86)

膛口制退器对后效期膛内压力的影响分析····················· 梁东晨,高建良,王明琨,刘国栋,王 江(89)

火箭炮定向器模态有限元分析·············································· 谢春雨,刘 璐,龚华雄,严蜀宇(91)

基于TRIZ的在役管道腐蚀检测装置创新设计···························· 尚 万,赵 武,曾 杰,李小龙(93)

液压推进系统在土压盾构机上的应用分析·································································· 廖雪梅(95)

基于PLC的药条自动打孔数控钻床的研发··········································· 赵继宏,孟瑞峰,郭建东(98)

经济型三维雕刻机的研究与设计······························· 韩文凯,陈海达,吴志刚,杨 超,张木凯(100)

基于Pro/E塑料顾问的电器盒上盖注射模具设计············ 陈洪振,朱永伟,邵 建,邓正泉,王 芳(103)

中小口径直缝焊管水压扩径机组研究·············· 寇永乐,徐能惠,刘继高,隋 健,李培力,马海宽(105)

高强带钢废边卷取机的设计与研究······································· 禹文锋,李郝林,查德根,王 勇(108)

多层金属薄板反复弯曲试验装置设计及运动仿真························································ 曾 敏(110)

中阶梯光栅铝膜纳米压痕材料隆起研究············································· 王 磊,石广丰,史国权(113)

不同工况条件下纳米添加剂抗磨减摩性能分析····································· 左维琦,袁 吉,黑 棣(115)

热处理工艺对合金渗碳钢件加工表面的影响······································· 王 敏,郭淑兰,徐学东(118)

超精密飞刀铣削加工工艺参数优化······························································ 高 栋,李 强(120)

T-1钢与ZG310-570异种金属焊接工艺研究········································ 宋应为,王文先,石 青(122)

三辊斜轧机轧制外螺纹管件工艺分析················································ 张海龙,杨晓明,陈 端(124)

基于MEMS陀螺的随钻测斜仪系统设计······················································· 龙达峰,苏 文(126)

基于西门子840D的平面度在线测量系统··········································· 伏 天,迟玉伦,李郝林(129)

基于模糊偏好法的老旧电梯安全风险评估·········································· 马幸福,陈炳炎,程一凡(132)

基于Hough变换运用形状角及梯度检测圆····················································· 方 菲,耿春明(135)

X射线法测量铸造支座的残余应力··················································· 肖 宁,吴寒剑,谢红初(138)

基于标准和试验改进的侧面防护装置测试系统················································ 杨春妮,肖 宇(140)

车用发电机噪声一致性试验研究·········································· 刘 星,张胜杰,唐 琴,闫 兵(142)

非接触测量规范的建立方法研究······························· 肖武华,李 明,柳 静,詹高伟,韦庆玥(145)

岩石振动激励模拟测试系统······································································ 李倩雯,王昌龙(147)

基于单片机ADμC812的太阳能自动跟踪系统设计·········································· 彭喜英,赵强松(150)

基于Delta并联机器人的传送带动态跟踪··········································· 邓明星,刘冠峰,张国英(153)

Lenze伺服系统在KDF2滤棒成型机中的应用···························································· 叶 娜(155)

基于51单片机的盲文助读器系统设计··································· 李锦明,李文景,陈红梅,骈 根(157)

基于改进遗传算法的伺服系统自抗扰控制研究························· 周宜然,甘 屹,陶益民,张阔峰(159)

基于机械视觉的工件在线实时检测及分拣系统研究······························· 陈伯豪,姜莉莉,方 强(162)

圆盘式抛光机的自动控制设计··································································· 徐驰宇,王建生(164)

一种基于双轴的太阳能自动跟踪装置······································································ 张新亮(166)

室内移动机器人路径规划算法··································································· 高 翔,郭卫东(168)

LabVIEWPLC结合在伺服系统中的应用······························································· 李海军(171)

基于CC2530的无线阀位变送器的设计························································· 李金喜,陈继永(173)

大型H型钢高焦加压站系统的优化改造··································································· 王秀华(176)

一种喷射机用无线遥控系统研制············································································ 张成成(178)

基于单片机的摇杆信号无线传输程序设计····················································· 王 超,赵 亓(180)

EDPF-NT+系统工程应用中的安全冗余设计··················································· 崔 倩,田 成(182)

高炉环行吊车的电机同步控制························································ 崔桂梅,巩 华,刘丕亮(185)

智能小车的路径跟踪控制算法研究······························································ 杨 权,蔡 勇(187)

重型商用车变速器换档系统失效模式分析与控制························································ 原 鑫(190)

缠绕式提升机卷筒筒壳开裂的原因及预防措施··························································· 谭爱兵(192)

应用电刷镀技术修复模具········································································· 张松奇,凌文丹(194)

电子凸轮在煤矿提升系统中的应用······························································ 张海滨,李建伟(196)

偏心轴()类零件的数控加工通用宏程序开发···························································· 刘培跃(198)

轨道齿轮箱装配中漏油原因及解决措施············································· 成春花,汝学斌,翟 晶(200)

侧架铸钢件热裂纹的形成及防止方法·············· 盛雁龙,王文先,李志杰,张秀清,杜志强,贺乐义(202)

基于单机容错服务器的控制系统网络架构设计·············· 李志宏,郎进平,杜迎喜,陈若珩,刘雯丽(205)

基于华中数控的刀具半径补偿在加工中的应用··························································· 段瑞永(207)

基于VB铝电解槽温度监测系统开发初探······················································ 姚志国,菅锁军(209)

液压阀块毛刺的预防与去除················································ 张 磊,唐少楠,朱小明,杨丽红(212)

变频器在带式输送机上的控制应用········································································· 李 芬(214)

基于UGNX 8.0的叶片仿真加工研究······································································ 吴 爽(216)

电流互感器现场检定常见问题分析······························································ 马骏骁,刘桂铭(217)

接箍报警器在带压作业中的应用研究概况·········································· 倪骁骅,程 冲,刘 青(220)

重复压裂工艺现状及展望········································································· 王 振,樊 军(222)

海洋设备防腐机理及其发展趋势································································ 王思伟,易学平(224)



附件:

TAG:
上一篇:2015年第2期目录
下一篇:没有了
展开