2015年第4期目录

访问:669时间:2020-05-12

小波新阈值法在振动信号去噪中的应用研究·········································· 吴存洁,谷玉海,徐小力(1)

基于飞机环控系统的安全性分析方法研究·································· 白 杰,邬 龙,杨建忠,孙晓哲(3)

汽车半主动控制悬架的仿真研究·································· 姜 钊,杨 晓,李耀刚,龙海洋,张文明(5)

平板单孔气膜冷却流动特性的实验研究··························································· 张笑雷,吕骋予(8)

大型客机风车不平衡振动载荷传递特性研究········································· 白 杰,李 广,王 伟(11)

盘式力矩电机齿槽转矩分析研究·································································· 王 钦,杨庆东(14)

基于CFD稳态分析的小柴油机进气系统优化研究·································· 朱成明,胡华强,栗 娟(17)

副构架式径向转向架导向机构参数研究························································· 赵天祺,黄运华(19)

100%低地板有轨电车动力学性能研究··························································· 陈 雷,黄运华(22)

VBMATLAB混合编程及其在图像处理软件中的应用······································ 孙 进,曹肖伟(25)

带式输送机零部件三维设计开发技术研究及应用·············································· 宋 琦,张亮有(27)

新型复合式活塞环气密性的数值仿真······································ 赵丹平,陈 洋,吴双群,冯 强(30)

天线装配工装定位优化设计······································ 赵理金,幸 研,仇晓黎,贲可存,倪 俊(33)

铝挤压机压余剪切过程有限元模拟···················································· 邢建斌,王丽薇,解文科(36)

基于结构可靠性的控制臂轻量化设计················································· 高 翔,李 阳,赵清江(38)

轴承外圈沟槽滚珠旋压有限元分析···················································· 陈今良,王 军,吴国洋(40)

基于SolidWorks的桥机主梁有限元仿真分析··················································· 师 玮,韩晓君(42)

减速器直齿圆柱齿轮有限元模态分析···························································· 王彦军,魏 炜(44)

管件式塑料检查井的非线性分析及精度控制········································· 宋 佳,曾 冬,高建和(47)

Web三维模型共享平台在工程制图教学中的应用··································· 何 丽,孙文磊,朱 颖(49)

民航发动机故障案例数据库系统设计················································· 李书明,杨龙飞,黄燕晓(52)

基于Pro/Mechanica的联合冲剪机床身结构优化设计···················· 童宝宏,杨庆庆,刘晓东,李学林(55)

炮口结构参数对炮口性能的影响分析··············· 王立君,赵俊利,雷红霞,刘 凯,李大勇,殷鹏贤(57)

基于Fluent对井下湿式除尘器的流场分析··········································· 王云龙,王宝中,李民主(60)

10 000 m3球罐整体热处理温度场三维模拟及实验验证················· 吕宵宵,赵毅红,陆华峰,陈荣发(63)

基于ADAMS的钻床六杆进给机构设计与仿真分析····················· 于 鹏,王培俊,李保庆,夏 欢(65)

基于ANSYS的迎流耐压壳体强度与稳定性分析··············································· 方 勇,熊传志(67)

基于AWE的某型火炮中变位齿轮分析···································· 张孝明,刘树华,彭克侠,张 亮(69)

液压支架后连杆静力分析与结构优化···························································· 李佩鸿,侯克邦(71)

视频流图像字符识别算法的研究和实现························································· 岳晓峰,龚青池(73)

飞行模拟器操纵加载机构设计及仿真···························································· 王 辉,莫 凡(76)

基于MATLAB的圆锥滚子圆柱分度凸轮的设计················································ 李建功,王晓月(78)

分件供送变距螺杆的三维实体建模与性能分析················································· 欧阳虎,黄运板(80)

基于NETNX Open开发技术研究······································································ 李如忠(83)

基于HyperMesh的某液压减震车车架有限元分析························ 周 青,陈靖芯,李 红,郑再象(85)

某特种车驾驶室骨架结构的静动态分析·············································· 郭贵平,李守成,张洪生(88)

自动人行道支反力计算方法分析············································································· 陈义东(90)

基于Pro/E的刮板输送机参数化设计与仿真研究························ 史万青,李建平,张红兵,牛广毅(92)

基于FIFO写数据方式的USB接口信号发生器设计··········································· 陶彦辉,刘克毅(94)

可变自由度并联振动筛的设计··································· 常 娟,王成军,胡志斌,韩董董,陈 蕾(97)

线控换档开关中的凸轮机构研究····················································· 张志强,陈辛波,岳 彪(100)

小型斜拉桥专用空心液压缸设计方法的研究······································· 冯晓鹏,李昕涛,贡德鹏(103)

无急回运动特性的曲柄摇杆机构的设计··································································· 齐晓霞(105)

电动汽车检测线上的定位行进机构的设计·········································· 张孟熙,李成群,高铁军(107)

带隔板立式储罐的结构分析设计································································· 苏文献,邬晓敏(110)

TC4钛合金棒材的缺陷分析················································ 张 杰,马红征,廖 强,文 宁(113)

深海承压舱加工工艺研究···················································································· 易学平(115)

电脑横机天桥的专用夹具设计························································ 俞 彬,娄骏彬,章跃洪(117)

基于大批量盖帽零件生产的冲压模具设计·········································· 李亚超,巴吾东,乔 龙(120)

薄壁气缸套工艺研究·············································································· 李志信,任家骏(122)

基于有限元的书夹弯曲件成形工艺研究························································ 祁晓杰,惠为东(124)

基于固定式工作台的压机线换模工艺的开发与研究····················································· 尤少君(127)

装填设备对中找正及其计算方法································································ 廖 军,郑国梁(129)

基于DHMM的滚动轴承故障诊断···················································· 樊 巍,傅 攀,郑晴晴(132)

加工中心精度保持性的评估与提高措施························································ 牟 冰,杨庆东(134)

基于LSSVM和神经网络的五轴加工中心误差补偿策略································· 王东斌,汪惠芬(137)

金工实习教学质量的模糊综合评价······································· 李 清,李朋林,李红宾,吉洪武(139)

基于PSOSVM的变压器故障诊断研究································································· 赵德鑫(141)

基于计算机视觉的手机U盘缺陷检测系统研究···································· 李 昂,潘 晴,戴知圣(143)

柔性轴加工尺寸误差预测·················································· 冯慧娟,苗 青,樊胜秋,李世杰(145)

造纸机多电机同步速度链控制系统研究························································ 王建华,詹国兵(148)

基于NX的华中数控818系统四轴后处理研究················································ 陆龙福,付天翼(150)

基于单片机的智能搬运平台协作系统的设计······ 梁 栋,王仲文,宋 涛,张 岩,闫 敏,王 静(152)

基于PLC的光伏玻璃基片分拣系统·················································· 夏 岩,刘 泉,牟 冰(155)

周界报警系统在煤矿爆破器材库中的应用································································ 李宇红(157)

数控机床直线电机负载突变控制策略研究·········································· 宋宏智,杨庆东,牟 冰(160)

自升式海洋平台升降控制系统的设计···································· 马建林,任丽娜,齐继阳,孟 洋(162)

高清网络视频监控系统的构建·············································································· 乔 鹏(165)

双边剪主电机同步控制的研究·············································································· 孙金柱(167)

基于矩阵式硅光电池组的光电定位系统的设计················································ 李建秋,路春光(170)

基于Citect和冗余PLC的煤层气集输控制系统··························································· 朱光灿(172)

一种新型柴油数字油耗仪的研发与应用························································ 谭小平,万小燕(175)

模糊控制整定P参数在载人自平衡车上的应用··························································· 李 洋(177)

施釉机器人灵巧度分析············································································ 黄金凤,何凯杰(180)

基于WinCCMATLAB的水位模糊控制系统设计······················································ 朱建军(183)

太阳能行车记录仪的设计········································································· 赵 彦,王増彩(185)

基于ARM的机场围界激光报警系统的研究··················································· 王増彩,赵 彦(187)

多种通信方式的瓦斯电站监控系统研究与应用··························································· 岳 忠(189)

基于蚁群算法的机器人切割轨迹规划················································ 童安璐,宗光华,王 巍(191)

六自由度并联机器人设计和关键技术研究···············································································      么双福,郑 飞,陈一梦,王云鹏,吴 帆,潘大为,刘响求(194)

LF精炼炉钢包底吹氩脱碳数学模型的建立与应用································· 刘 强,赵剑波,马 平(197)

光机电一体化设备中工件材质判别的程序设计··························································· 顾宇峰(199)

Zigbee无线技术在混凝土机械一体化控制上的应用····················································· 刘 暾(201)

皇冠盖抗弯曲力预测模型的研究································································ 潘 亮,黄晓晖(203)

电子图纸标题栏绘制及其信息处理分析············································· 王鹏锦,薛爱文,刘世忠(205)

汽车总布置评审流程·············································································· 尹民鑫,高文杰(207)

基于Pro/E的采煤机齿轮修形量的研究···································································· 郑 轶(209)

手工电弧焊焊接工艺参数对焊缝成型的影响······························································ 刘红先(211)

基于PDMCAD/CAPP/ERP集成方案的研究与实现······································· 王 冰,文卫星(213)

双层复合管液压胀接成形影响因素分析·································· 徐龙江,雷君相,高贵杰,孙丹阳(215)

十字滑台装配测量技术······················································································· 张 鹏(217)

镀层板料结合性能测试方法评价······························· 朱冬青,石 砦,司帅帅,何 群,华思雨(221)

内燃机曲轴主轴承润滑分析研究综述················································ 李 瑰,张保成,田大龙(224)



附件:

TAG:
上一篇:2015年第5期目录
下一篇:2015年第3期目录
展开